Wringer (Lab Padder) - TNG1077

The TNG1077 Wringer (Lab Padder) is designed to evenly squeeze or extract excess liquid from fabric specimens, ensuring consistent preparation for further testing. The machine operates by using a motor-driven drum that rotates at a constant speed of 25 mm/s (9 rpm). The drum, with a diameter of 54 mm made of neoprene, applies pressure to the fabric as it passes through, removing surplus liquid. The device is suitable for various textile materials, including yarns, fabrics, and elastic textiles. It supports testing procedures that require precise control over moisture content, such as those outlined in ISO 6330 and ISO 105-C06. The machine's dimensions are 960 mm in length, 240 mm in width, and 370 mm in height, and it operates on 220/110 V at 50/60 Hz. The adjustable load weight allows for flexible pressure settings, accommodating different test requirements. The TNG1077 is intended for use on a table, while a similar model can be placed on the floor.

Laboratory Padder / Wringer, to evenly squeeze or extract excess liquid from fabric specimens for the next procedure of the test. This Laboratory padder is used for many kinds of textile tests, such as yarn dyeing, fabric dyeing, and elastic fabric, in order to precisely ensure the rest liquid of specimens.

This textile padder machine can conduct tests on the table, while another type of textile padder can be placed on the floor.

Precise testing results

driven by a motor, the drum runs at a constant speed and can evenly squeeze or extract excess liquid.

Meet different test requirements

Flexible pressure adjustment by increasing or decreasing the load weight.

Long service life and well design

Made of stainless steel and also equipped with a removable water tank for durable operation.

Strictly meet standards

All data for the Wringer (Lab Padder) meet the standard parameters, for example, GB/T 8629 and ISO 6330.

Consistency with international third-party laboratories

The test data are comparable to the test results obtained by well-known international third-party laboratories.

High reproducibility

Whether is the same set of samples, or different machines of the same model, after multiple tests, the results are consistent.

• Length: 960 mm
• Width: 240 mm
• Height: 370 mm
• Test principle
• Applied load on drum, started the machine to make the drum rotate, placed fabric end in the middle of the two drums, drum drives fabric to roll, while squeezing out excess water.

Applied load on drum, started the machine to make the drum rotate, placed fabric end in the middle of the two drums, drum drives fabric to roll, while squeezing out excess water.

Instrument Purpose The Padder extractor (Lab Wringer) is designed for textile laboratory research and testing in accordance with AATCC, ASTM and ISO test methods, such as the determination of liquid content in small cloth samples during the friction colorfastness test. The instrument extracting excess liquid from fabric or other materials by uniform extrusion, and it is a simple and effective test tool. Operation Characteristic You can process specimens through the wringer automatically with the power switch ON. With the power ON, the rotational speed of the rollers is constant at 9.3 rpm and can be adjusted; this means that a specimen will pass through the rollers at 2.54cm/sec (1.0 in/sec). Its feature is that those double rollers connected to a set of weights that allow increase or decrease of pressure by manual. Adjust the pressure by hanging weights from the weight hanger lever arm.