Laboratory Tenter - TNG1076

The TNG1076 Laboratory Tenter is designed for conducting dry laboratory tests on drying, setting, and resin processing baking. It is commonly used in conjunction with a small padder or resin pressure dyeing machine to evaluate color changes and verify pharmaceutical test results. The instrument operates by using a flexible continuous pin chain system to dry and heat-treat fabric samples. It supports testing for color matching, heat fixing, roll dyeing baking, and resin finishing processes. The TNG1076 complies with standards such as ISO 105-B02, ISO 105-B06, and ISO 105-B07, which relate to color fastness and dyeing procedures. It is suitable for a range of textile materials including cotton, polyester, and blends. The machine provides conditions similar to those of a pilot plant, enabling the assessment of fastness and product quality. The operation requires checking the power grounding wire before use and following the specified workflow to ensure accurate and reliable test results.

Laboratory Tenter, Replaces conventional drying chambers to provide accurate color matching and greatly reduces sampling time. In addition, it allows instant testing of fabrics coming off the mill for timely detection of side/center color differences.

Lab tenter is an excellent tool for producing samples as it replicates exactly the desired color and finishes size. It evaluates the degree of color change and further prevents color differences during the resin finishing or drying process.

Performs dye tests, auxiliary and chemical tests, and provides conditions similar to those of a pilot plant to evaluate the effect on fastness and product quality.

Technical Parameter of Laboratory Tenter

Batch working with pin frame (length and width are adjustable) 170 ~ 400 mm

Continuous working with endless pin chain

The electric heating power is 19kw, temperature 20 ~ 220 ℃

Moving speed 0.5 m/min～1.7 m/min

3 sets of air-circulating fans ensure high drying and thermal soling performance

Equipped with a cloth pressing wheel on the feeding side, and a pin-up device to lead fabric to the reserve box at the end

• 2620 x 890 x 1380 mm (L x W x H)
• Operation Method of Laboratory Tenter
• The workflow of the machine is as follows
• step1 Before starting the equipment, you must check whether the power grounding wire is reliably grounded. Then check the following
• Whether the three-phase motor rotation direction is correct. Whether the special air switch is flexible, whether the needle board fabric holder is stopped in the rear position (exit position), close the left and right, and rear side exhaust port.
• step2 At first, open the power switch knob.
• step3 Secondly, set the required working temperature.
• step4 According to the test cloth drying, shaping time, set the holding time.
• step5 Then, open the heating knob, and heaters start to be put into operation.
• step6 After reaching the required temperature, then it will automatically enter the heat preservation state.
• step7 Put the needle board frame with good cloth on the bracket, press the feed button, start the automatic work process, when time is up, automatically quit and call the bell.
• step8 Prepare the next batch of drying.