ProPress Sample Press - TNG1107

The TNG1107 ProPress Sample Press is a digital, servo-driven device used to cut fabric samples into small, uniform pieces. It operates without an air source or oil pressure, making it suitable for environments where such systems are not available. The machine is capable of cutting multiple layers of fabric simultaneously, improving efficiency in sample preparation. The cutting process involves placing the sample flat on the plate and pressing the button with both hands, which initiates the cutting action. After cutting, an integrated air-cleaning system removes any residual fibers or debris, ensuring sample purity. A high-definition camera allows operators to visually inspect the cutting area and manually initiate the cleaning cycle if needed. The machine includes safety features such as a two-hand start mechanism and a light barrier to prevent accidental contact. It supports various cutting sizes including 3×3 mm, 5×5 mm, and 10×10 mm, with customization options available. The TNG1107 complies with relevant textile testing standards, though specific standard codes are not provided in the reference description.

The working principle of the ProPress Sample Cutting Machine

Lay the sample flat on the plate, and press the button with both hands, then the plate will enter and the sample cutting machine automatically presses and cuts the samples. When the cutting press is finished, the ProPress textile sample cutting machine automatically activates a strong air-cleaning system to blow away any fibers and debris left behind, ensuring that the samples are not mixed.

The operator can observe whether there is any fabric sample residue through the high-definition camera equipped with ProPress Sample Cutter from the operation screen, and can manually start the cleaning program again.

In addition, the ProPress automatic fabric cutting machine ensures your safety: start-up with two hands, and the work area is equipped with a light barrier to prevent accidental injury. Applicable for various cutting sizes such as 3×3 mm, 5×5 mm,10×10 mm, or the dimensions can be customized.

More accurate sample preparation, for more reliable test results.

Preparation & Testing Procedures 1 Prepare the specimen, ensuring it is a square with dimensions no smaller than 100mm x 100mm and no larger than 150mm x 150mm. 2 Turn on the device. After turning it on, the device will automatically reset and be in a standby state. 3 Place the specimen on the white tray, then simultaneously press both buttons. The tray will automatically enter the device, and the cutting process will begin. 4 After cutting is complete, the tray will automatically extend out. Remove the tray. Care and Maintenance 1 Regularly maintain cleanliness and hygiene of the equipment and control system. 2 Prevent exposure of the machine or control system to high temperatures, excessive humidity, dust, corrosive substances, water, etc. 3 Perform regular inspections to maintain the integrity of parts and components.