Moisture Management Tester - TNG1050

The TNG1050 is designed to assess the moisture management capabilities of textiles by quantifying their ability to absorb and diffuse liquid. The instrument operates by applying a conductive salt solution to a fabric sample and measuring the resistance changes between upper and lower multi-loop probes. These resistance changes are recorded over time and used to calculate key parameters such as wetting time, water absorption rate, soaking radius, and diffusion rate. The TNG1050 is applicable to knitted, woven, and nonwoven textile fabrics. It supports testing according to AATCC 195 and GB/T 21655.2. The test solution used has a conductivity of 16 mS± 0.2 mS. The device features a USB 1.1/2.0 interface for data transfer and includes analysis software. The operating temperature range is 18°C to 40°C with relative humidity between 20% and 80% (non-condensing). The pump on time is 20 seconds. The instrument is equipped with a precision motor control system that automatically positions the test head and stops the test upon reaching a set pressure. The dimensions of the TNG1050 are 280 x 420 x 400 mm (L x W x H).

Fast and Accurate moisture testing, 2 mins to complete.

Moisture Management Tester contains a pair of upper and lower multi-loop resistance measurement probes. Simply drop the salt solution on the sample. As the solution passes through the sample, the computer can dynamically record the change in resistance of the upper and lower probes and obtain accurate readings of the wetting time, water absorption rate, soaking radius, and diffusion rate of the fabric through a standard calculation formula.

This Moisture Management Tester is equipped with a precision motor control device.

One key to starting the test, the motor automatically drives the test head to the specified position, with the built-in pressure detection device, the moisture test will stop by reaching a fixed pressure automatically.

The Moisture-Wicking test is reliable.

The matching transparent shield can protect the sample and ensure the stability of the testing process and the accuracy of the moisture management test results.

The drip system is accurate and stable.

Moisture Testing Machine has a liquid recovery function, to prevent the infusion tube salt water crystals from blocking the pipeline.

Full metal shell, good anti-interference performance.

Easy to use.

• 280 x 420 x 400mm (L x W x H)
• Standards（fabric wicking test standard）
• GB/T 21655.2
• Test Principle of Moisture Management Tester
• The Moisture Management Tester includes an upper and lower concentric liquid sensor with multiple probes, the liquid tube in the upper sensor will simulate the fixed concentration of human sweat saline water, drops evenly on the fabric, and the sensor probes test the resistance between different rings to reflect the change in resistance of the liquid in the fabric absorption and diffusion, to get the ability of the fabric to absorb and diffuse sweat.
• Strictly meet standards: All data for Moisture Management Tester meet the standard parameters, for example, AATCC 195.
• Consistency with international third-party laboratories: The moisture-wicking test data are comparable to the test results obtained by well-known international third-party laboratories.
• High reproducibility: Whether is the same set of samples, or different machines of the same model, after multiple tests, the moisture management test results are consistent.
• User-friendly transparent warranty policy
• Textile testing machines, 14 months free warranty (12 months normal warranty time + 2 months shipping time). Besides, all spare parts, have 3 months free warranty.

• Wetting Time Top / Bottom (WTT / WTB) or Wetting Diffusion Rate (Wetting Time): Measures the time it takes for moisture to diffuse from the fabric’s surface to the interior or exterior of the fabric. This reflects the ra
• Wetting Time Top / Bottom (WTT / WTB) or Wetting Diffusion Rate (Wetting Time): Measures the time it takes for moisture to diffuse from the fabric’s surface to the interior or exterior of the fabric. This reflects the ra
• Wetting Time Top / Bottom (WTT / WTB) or Wetting Diffusion Rate (Wetting Time): Measures the time it takes for moisture to diffuse from the fabric’s surface to the interior or exterior of the fabric. This reflects the ra

The Moisture Management Tester includes an upper and lower concentric liquid sensor with multiple probes, the liquid tube in the upper sensor will simulate the fixed concentration of human sweat saline water, drops evenly on the fabric, and the sensor probes test the resistance between different rings to reflect the change in resistance of the liquid in the fabric absorption and diffusion, to get the ability of the fabric to absorb and diffuse sweat.

Test Specification The Moisture Management Tester is used to test and evaluate the liquid water dynamic transfer performance of textiles. This testing method provides an objective method for measuring the liquid water dynamic transfer properties of knitted fabrics, woven fabrics, and nonwovens, and is used in the quality control of fabrics, the research and development of new functional fabrics and garments, etc. This method is not used to test the transport performance of vapor water. This testing method is not suitable for coated fabrics, glued fabrics, or fabrics of complex structures. This testing method is not suitable for fabrics with high water absorbability such as woolen fabrics or thick fabrics.