Horizontal Flammability Tester - TNG1064

The TNG1064 Horizontal Flammability Tester is designed to determine the flammability performance of materials by simulating real-world fire conditions. The instrument operates by exposing a sample to a controlled flame source and measuring the rate at which the flame spreads across the material's surface. This test helps evaluate the material's resistance to fire spread, which is critical for ensuring safety in environments where flammable materials are used. The TNG1064 complies with the standards DIN 75200, ISO 17074, and ISO 3795, which are widely recognized for assessing flame retardancy in textiles and other materials. The device is suitable for testing a range of materials, including leather interior components, polymer-based products, and textiles, commonly found in automotive interiors such as seat cushions, headrests, and floor coverings. The tester features a steel-encased chamber with a transparent observation window for monitoring the combustion process. It includes a fire nozzle with a diameter of 9.5 mm and is equipped with an LCD display for real-time ignition and combustion time readings. The system supports automatic recording of test data and results, enhancing accuracy and reducing manual intervention. The sample dimensions are 360 x 100 mm, with a 25 mm gap between metal wires for the sample placement. The TNG1064 provides reliable and consistent data, aligning with international third-party laboratory results.

The Horizontal Flammability Tester is suitable for testing the flame retardant properties of leather interior materials, polymer materials, textiles, etc. Such as used in all kinds of automobiles, including seat cushions, seat belts, roof linings, armrests, decorative panels, headrests, floor coverings, sun visors, curtains, and other interior parts. Thus, it provides the data basis for new material research and development, product quality acceptance, etc.

In addition to, we also have a series of other flammability testers that you can click to learn more about.

Safety settings: the flammability tester box shell is a steel structure and encloses the testing process. Through the transparent observation window, you can clearly observe the whole combustion process.

Accurate: the test data is consistent with internationally renowned third-party laboratories.

Very simple operation: gas and fire buttons, an LCD program, real-time display of ignition time and combustion time.

The high degree of automation: automatic recording of test time, automatic display of results and automatic timing once the test starts.

Reasonable design: Equipment with its own fan, test combustion fumes safely discharged.

The flammability testing machine is beautiful in appearance, easy to use, and reliable in performance.

• Fire nozzle DIA: 9.5mm
• Fire height 38mm+/-2
• Sample clamp 360 x 100mm / Interior dimension 330x50mm
• The sample below 25mm pitch between metal wire is 25mm
• Marked line Starting point 38mm / Endpoint 292mm from the Ignition point
• Nozzle to Sample 19mm
• Sampling plate
• Bunsen burner (φ9.5mm)
• Length: 485 mm
• Width: 360 mm
• Height: 570 mm
• ECE R118 Appendix 6
• Optional Standards
• FMVSS 302 (Ф 10mm Flame nozzle)
• Strictly meet standards
• All data for meet the standard parameters.
• Consistency with international third-party laboratories
• The test data are comparable to the test results obtained by well-known international third-party laboratories.
• High repeatability
• With the same set of samples, the same machine, after multiple tests, the results are consistent.
• High reproducibility
• With the same set of samples, and different machines of the same model, after multiple tests, the results are consistent.
• Longer service life

• Fire nozzle DIA: 9.5mm
• Fire height 38mm+/-2
• Sample clamp 360 x 100mm / Interior dimension 330x50mm
• The sample below 25mm pitch between metal wire is 25mm
• Marked line Starting point 38mm / Endpoint 292mm from the Ignition point
• Nozzle to Sample 19mm

Test Principle A sample is held horizontally in a U-shaped holder and is exposed to the action of a defined low-energy flame for 15s in a combustion chamber, the flame acting on the free end of the sample. The test determines if and when the flame extinguishes the time in which the flame passes a measured distance. Sample Preparation Take 5 samples from the tested items. If the object burns at a different speed in different directions, the sample should be intercepted and tested separately in different directions. The method of sample interception is as follows. 1 When the article is intercepted by width, the sample should be intercepted containing the full width and at least 500mm length, and the material from the edge of the 100mm shall be cut off, then intercept the samples equidistant and evenly in the rest article.