45 Degree Flammability Tester - TNG1062

The TNG1062 45 Degree Flammability Tester is used to assess the flammability of textile materials by simulating controlled burning conditions. The instrument operates by igniting a specimen and measuring the time it takes for the flame to spread, providing data for classification under specified standards. It is applicable to various materials including medical textiles such as face masks, surgical gowns, protective clothing, and drapes. The tester supports standards including ASTM D1230, ASTM F2100, and 16 CFR Part 1610. The device features an automatic igniter, a stainless steel test cabinet with a glass observation panel, and a brushing device. The flame measuring tape is set at 16 mm, and the distance from the nozzle to the specimen is 8 mm. The time display has an accuracy of 0 ~ 999.9 s with 0.1 s increments. The power supply is 220/110 V, 50/60 Hz, 3A. The instrument includes five sample holders and a desiccator with color-changing silica gel for environmental control.

45 Degree Flammability Tester, is to determine the fabric flammability (fabric burning test) under controlled conditions. This model 45 degree flammability test chamber is also suitable to evaluate the flammability of medical textiles such as medical face masks, surgical gowns, protective clothing, and drapes.

An automatic igniter is equipped to ensure the 45 degree fabric flammability tester safe and easy to operate. Besides, stainless steel test cabinet with a glass observation panel provides automatic timing of flame spread in 0.1-second increments from the ignition. What’s more, a brushing device is included.

Safety setting: equipped with heat-resistant observation window, so it is easy to observe the internal test status.

Long service life: the stainless steel case, highly resistant to corrosion.

Meeting various needs: different sample holders are available for replacement to meet the requirements of different standards.

Easy to use: automatic flame application according to the set time, automatic flame extinguishing when the flame application time is reached.

Intelligent and efficient operation: touch screen control, automatic recording of burning time and burning rate, with timer accuracy of 0.1s.

Distinction among different flammability tests

The 45-degree burning test method is to determine the fabric flammability (fabric burning test) under controlled conditions.

The vertical flammability test method is suitable for testing the combustion characteristics of children’s clothing, decorative fabrics, laminated fabrics, coated fabrics, etc.

The horizontal flammability test method is suitable for testing all kinds of textiles, especially automotive interior fabrics.

Strictly meet standards

All data for meet the standard parameters.

Consistency with international third-party laboratories

• 220/110 V, 50/60 Hz, 3A
• 550 * 330 * 550 mm (L x W x H)
• Optional Accessories
• Brushing device
• Sample holder 5 sets
• Sample holder
• Flame measuring tape: 16mm
• Glass desiccator (inner DA 400mm) and color-changing silica gel desiccant (500g/bottle)
• Sampling plate
• #50 Mercerized cotton thread
• Calibration plate
• 16 CFR Part 1610

Test principle Under the specified conditions, the flame spread time required to burn to the mark line flame by ignition for 1 second on the surface of a sample placed at 45 degrees. Test method By placing the specimen at an angle of 45° (the length of the specimen is at an angle of 45° to the horizontal) and igniting the specimen with the combustion source on the upper or lower surface below the specimen, one can measure the time required to measure the specimen burning upwards for a certain distance. Besides, this testing method can also measure the renewal of the specimen burning, flame retardant time, flame spread rate, charring length, and charring area.