ISO 6330: testing scope and instrument selection

Conclusion The TNG1041 and TNG1112 instruments are designed to meet the requirements of ISO 6330, ensuring accurate and standardized testing for colour fastness and fabric shrinkage.

Instrument Specifications and Compliance with ISO 6330 The TNG1041, known as the Standards Tumble Dryer, is specifically designed for colour fastness testing. One of its key specifications is its capacity of 40 kg, which ensures that a sufficient amount of fabric can be tested in a single cycle, aligning with the ISO 6330 requirement for standardized sample sizes. This capacity allows for consistent testing conditions, reducing variability in results. Additionally, the TNG1041 operates on a power supply of 220/110 V at 50/60 Hz, ensuring compatibility with various laboratory environments while maintaining precise control over the drying process. This specification supports the ISO 6330 standard by ensuring that the instrument can be used in different regions without compromising the accuracy of the test results.

Instrument Specifications and Compliance with ISO 6330 The TNG1112, or the Automatic Fabric Shrinkage Machine, is designed for shrinkage and dimensional change testing. One of its key specifications is its weight capacity of 215 kg, which is essential for testing larger fabric samples that may experience significant dimensional changes. This capacity ensures that the machine can handle the required load without mechanical stress, maintaining the integrity of the test results. The machine also operates on a power supply of 220/110 V at 50/60 Hz, similar to the TNG1041, ensuring consistent performance across different laboratory setups. This specification supports the ISO 6330 standard by ensuring that the machine can be used in diverse environments while maintaining the accuracy and reliability of the test results.

Additional Specifications and Standard Compliance Both instruments are built to meet the dimensional requirements specified in their respective standards. The TNG1041 has a length of 600 mm and a width of 550 mm, providing ample space for the test samples while ensuring that the machine fits within standard laboratory configurations. The TNG1112 has a length of 750 mm and a width of 700 mm, allowing for the placement of larger samples without compromising the machine's structural integrity. These dimensional specifications are crucial for ensuring that the testing environment is consistent and that the results are comparable across different laboratories. By adhering to these specifications, both instruments support the ISO 6330 standard, ensuring that the testing process is standardized, reliable, and repeatable.