ASTM D1424 tester models and their published ranges
The Elmendorf Tear Tester (TNG1017) is a reliable instrument for conducting tear resistance testing in accordance with ASTM D1424.
Comparison of Instrument Specifications
The Elmendorf Tear Tester (TNG1017) is specifically designed for tear resistance testing in accordance with ASTM D1424. This instrument is essential for evaluating the mechanical properties of flexible materials, particularly in the context of packaging and textiles. The specifications of the TNG1017 are crucial for ensuring accurate and reproducible test results.
Power and Physical Dimensions
The TNG1017 operates on a power supply of 220/110 V at 50/60 Hz, which ensures compatibility with various electrical systems worldwide. This feature is important for laboratories that may be located in different regions with varying power standards. The physical dimensions of the instrument are 580 mm in length and 420 mm in width, making it compact and suitable for use in laboratories with limited space. These specifications support the standard by ensuring that the instrument can be used in a wide range of environments without compromising performance.
Test Accuracy and Reproducibility
The Elmendorf Tear Tester (TNG1017) is designed to provide accurate and reproducible test results, which is a fundamental requirement for ASTM D1424. The instrument's specifications, including its power supply and physical dimensions, contribute to the overall reliability of the testing process. The ability to operate on a standard power supply and its compact design allow for consistent testing conditions, which is essential for meeting the requirements of the standard.
Compliance with ASTM D1424
The specifications of the TNG1017 are aligned with the requirements of ASTM D1424, which outlines the procedures for determining the tear resistance of flexible materials. The instrument's power supply and physical dimensions are critical for ensuring that the testing process is conducted under controlled conditions. By adhering to these specifications, the TNG1007 provides reliable data that is essential for quality control and material evaluation. The combination of these features ensures that the instrument meets the necessary standards for accurate and consistent testing.
Instrument models referenced
- TNG1017 Elmendorf Tear Tester (Bursting / Tear / Tensile Strength Testing). Published specifications include 220/110 V 50/60 Hz; Length: 580 mm Width: 420 mm.
Editorial note. This application note summarises the published scope of the standard and our documented model data. Configuration requirements vary between standard editions, and instruments support a method only with the appropriate fixtures and accessories. Please confirm the required configuration against the applicable edition of the standard before ordering; conformity of a given test result also depends on the specimen and the procedure followed.
Instruments referenced
Test standards referenced
Need the instrument for this method?
Send the standard number and the material. We reply with the matching model, its full specification table and a quotation.