AATCC 22 tester models and their published ranges
The Spray Rating Tester (TNG1054) is designed to meet the requirements of AATCC 22, ensuring accurate measurement of water resistance in textiles.
Comparison of Spray Rating Tester (TNG1054) with AATCC 22 Standards
The Spray Rating Tester (TNG1054) is specifically engineered to perform tests in accordance with AATCC 22, which evaluates the water resistance of textile materials. This standard is crucial for assessing how well fabrics repel water, a key factor in determining their suitability for outdoor and protective applications. The TNG1054 model is equipped with specifications that directly support the execution of tests under AATCC 22, ensuring consistency and reliability in results.
Instrument Specifications and Their Relevance to AATCC 22
The TNG1054 Spray Rating Tester has a length of 360 mm and a width of 280 mm, which are critical dimensions for ensuring that the test sample is properly positioned and exposed to the spray. These dimensions are in line with the requirements of AATCC 22, which mandates specific sample sizes to maintain uniformity across different testing environments. Additionally, the instrument is compliant with ISO 4920 and AATCC 22 GB/T4745, which further validates its use for standardized testing procedures.
Compliance and Standardization
The TNG1054 Spray Rating Tester is designed to meet the stringent requirements of AATCC 22, ensuring that the testing process is both accurate and repeatable. The instrument's compliance with ISO 4920 and AATCC 22 GB/T4745 underscores its reliability in delivering consistent results. These standards are essential for manufacturers and researchers who need to evaluate the water resistance of textiles in a controlled and standardized manner. By adhering to these specifications, the TNG1054 ensures that the test outcomes are credible and can be compared across different materials and testing conditions.
Conclusion
The Spray Rating Tester (TNG1054) is a vital instrument for conducting tests in accordance with AATCC 22. Its specifications, including the dimensions of 360 mm by 280 mm and compliance with ISO 4920 and AATCC 22 GB/T4745, ensure that the testing process is both accurate and standardized. These features make the TNG1054 an essential tool for anyone involved in the evaluation of textile water resistance.
Instrument models referenced
- TNG1054 Spray Rating Tester (Air / Water / Vapour Permeability Testing). Published specifications include Length: 360 mm Width: 280 mm; ISO 4920 AATCC 22 GB/T4745.
Editorial note. This application note summarises the published scope of the standard and our documented model data. Configuration requirements vary between standard editions, and instruments support a method only with the appropriate fixtures and accessories. Please confirm the required configuration against the applicable edition of the standard before ordering; conformity of a given test result also depends on the specimen and the procedure followed.
Instruments referenced
Test standards referenced
Need the instrument for this method?
Send the standard number and the material. We reply with the matching model, its full specification table and a quotation.