AATCC 127 FAQ: instruments, ranges and method scope
The Hydrostatic Head Tester (TNG1056) is designed to meet the requirements of AATCC 127, ensuring accurate measurement of fabric water resistance.
What is the power requirement for the Hydrostatic Head Tester?
The Hydrostatic Head Tester (TNG1056) operates on a power supply of 220 V at 50 Hz. This specification ensures compatibility with standard electrical systems in many regions, allowing for consistent and reliable testing conditions.
What are the physical dimensions of the Hydrostatic Head Tester?
The Hydrostatic Head Tester (TNG1056) has a length of 690 mm and a width of 540 mm. These dimensions are important for ensuring the instrument fits within standard laboratory setups and allows for easy handling and placement during testing.
Which standards can the Hydrostatic Head Tester support?
The Hydrostatic Head Tester (TNG1056) supports AATCC 127 option 2, which is equivalent to ISO 811. This standard is crucial for evaluating the water resistance of textiles, providing a reliable method for assessing performance under controlled conditions.
What optional standards can be used with the Hydrostatic Head Tester?
In addition to AATCC 127 option 2, the Hydrostatic Head Tester (TNG1056) can also support ISO 1420 method B as an optional standard. This flexibility allows laboratories to conduct tests according to different international standards, ensuring broader applicability and compliance with global requirements.
How does the Hydrostatic Head Tester ensure accurate testing?
The Hydrostatic Head Tester (TNG1056) ensures accurate testing through its design and specifications. The 62 kg weight of the testing apparatus provides the necessary pressure to simulate real-world conditions, while the precise dimensions and power requirements ensure consistent and repeatable results. These specifications are essential for meeting the rigorous demands of AATCC 127, allowing for reliable and standardized testing procedures.
Instrument models referenced
- TNG1056 Hydrostatic Head Tester (Air / Water / Vapour Permeability Testing). Published specifications include 220 V 50 Hz; Length: 690 mm Width: 540 mm.
Editorial note. This application note summarises the published scope of the standard and our documented model data. Configuration requirements vary between standard editions, and instruments support a method only with the appropriate fixtures and accessories. Please confirm the required configuration against the applicable edition of the standard before ordering; conformity of a given test result also depends on the specimen and the procedure followed.
Instruments referenced
Test standards referenced
Need the instrument for this method?
Send the standard number and the material. We reply with the matching model, its full specification table and a quotation.