Single Fiber Strength Tester - TNG1023

The TNG1023 Single Fiber Strength Tester is designed to determine the tensile strength of individual fibers, including crimped fibers, provided that the fiber length meets the gauge length requirements specified in ISO 5079. The instrument operates by applying a controlled load to a single fiber until it breaks, recording the force required and the elongation. It supports testing in accordance with ISO 5079 and GB/T 14337. The device is equipped with a load cell that measures force with an accuracy of ±1% of full scale and a resolution of 0.01 cN. The elongation range is limited to ≤140 mm, with an elongation measuring accuracy of 0.01 mm. The lower clamping device can be adjusted to fall at a speed of 1~200 mm/min, with a falling speed accuracy of ≤1%. The machine is suitable for synthetic fibers but not for natural fibers such as wool and cotton, as these materials are typically tested in bundle form according to ISO 3060 and IWTO 32? 82. The TNG1023 provides real-time display of test results and allows for settings in force units such as N, Kgf, lb, and cN. It is easy to load and unload specimens and is capable of a maximum payload test of 600 cN.

Single Fiber Strength Tester, applicable to all fibers, including crimped fibers, provided that the length of fiber available enables the gauge length specified in standard ISO 5079. NOTE For natural fibers (especially wool and cotton), the single fiber strength tester is not suitable, the breaking test most commonly performed is that of bundles of fibers (see ISO 3060 and IWTO 32? 82).

If you are looking for an instrument for single yarn strength testing, please refer to this model.

• Real-time display testing result and settings
• Force unit: N, Kgf, lb, cN
• High accuracy and fast response
• Easy to load and unload specimen

• The payload test: 600cN
• Load measuring accuracy: ±1% (F.S)
• Resolution: 0.01 Cn
• Max Elongation range: ≤ 140mm
• Elongation measuring accuracy: 0.01mm
• The falling speed of lower clamping device: 1~200 mm/min (adjustable)
• The accuracy of falling speed: ≤ 1%
• The rising speed of lower clamping device: 100 mm/min
• Length: 350 mm
• Width: 400 mm
• Height: 610 mm

• Real-time display testing result and settings
• Force unit: N, Kgf, lb, cN
• High accuracy and fast response
• Easy to load and unload specimen