Finding ASTM D3776 equipment through GSM
The TNG1103 Fabric Scale and TNG1104 Pneumatic Sample Press are essential instruments for conducting tests in accordance with ASTM D3776, which specifies the methods for determining the mass per unit area of textile fabrics.
Understanding ASTM D3776 and Its Testing Requirements
ASTM D3776 is a standard that outlines procedures for measuring the mass per unit area (gsm) of textile fabrics. This is a critical parameter for quality control and material specification in the textile industry. The standard requires precise and repeatable measurements to ensure that fabric samples meet defined weight criteria. To achieve this, the testing process involves preparing a sample, measuring its weight, and calculating the mass per unit area using the dimensions of the sample.
Role of the TNG1103 Fabric Scale in ASTM D3776 Testing
The TNG1103 Fabric Scale is specifically designed for use in GSM Testing and is directly aligned with ASTM D3776. This instrument features a maximum load capacity of 3.5kg, which allows for accurate measurement of fabric samples without exceeding the scale's range. Additionally, the scale is equipped with a length of 210 mm, ensuring that the sample can be measured precisely within the required dimensions. These specifications are crucial for maintaining the accuracy and consistency of measurements, which are essential for compliance with ASTM D3776.
Role of the TNG1104 Pneumatic Sample Press in ASTM D3776 Testing
The TNG1104 Pneumatic Sample Press is another key instrument in the GSM Testing category and is also referenced in ASTM D3776. This device is used to prepare fabric samples by pressing them into a flat, uniform shape, which is necessary for accurate weight measurement. The press has a pressure range of 0.5-0.6 Mpa, ensuring that the sample is adequately compacted without causing damage. The length of 400 mm provides sufficient space for handling and positioning the sample during the pressing process. These specifications support the standard's requirement for uniform and consistent sample preparation, which is vital for reliable measurement results.
Instrument Specifications and Their Relevance to ASTM D3776 Compliance
Both the TNG1103 Fabric Scale and TNG1104 Pneumatic Sample Press are engineered with specifications that directly support the requirements of ASTM D3776. The TNG1103's 3.5kg capacity and 210 mm length ensure accurate weight and dimension measurements, while the TNG1104's 0.5-0.6 Mpa pressure and 400 mm length support proper sample preparation. These features collectively enable laboratories to perform precise and repeatable tests, ensuring compliance with the standard and maintaining the integrity of the testing process.
Instrument models referenced
- TNG1103 Fabric Scale (GSM Testing). Published specifications include 220/110 V 50/60 Hz; Length: 210 mm.
- TNG1104 Pneumatic Sample Press (GSM Testing). Published specifications include Length: 400 mm.
Editorial note. This application note summarises the published scope of the standard and our documented model data. Configuration requirements vary between standard editions, and instruments support a method only with the appropriate fixtures and accessories. Please confirm the required configuration against the applicable edition of the standard before ordering; conformity of a given test result also depends on the specimen and the procedure followed.
Instruments referenced
Test standards referenced
Need the instrument for this method?
Send the standard number and the material. We reply with the matching model, its full specification table and a quotation.