ASTM D1422: which instrument fits and how to decide
The Twist Tester (TNG1091) is the appropriate instrument for compliance with ASTM D1422, as it meets the required specifications for testing fiber twist.
Instrument Selection Based on ASTM D1422 Requirements
ASTM D1422 outlines the procedures for determining the twist of yarns, which is essential for assessing the quality and performance of textile materials. When selecting an instrument for this method, it is critical to focus on specifications that ensure accurate and repeatable measurements. The Twist Tester (TNG1091) is specifically designed for this purpose and includes key features that align with the standard.
Key Specifications and Their Relevance to ASTM D1422
The Twist Tester (TNG1091) is equipped with a power supply of 220/110 V at 50/60 Hz, ensuring compatibility with various regional electrical systems. This specification is vital for consistent operation in different laboratory environments, which is necessary for reliable test results. Additionally, the instrument has a length of 880 mm, which allows for the proper setup of test samples without introducing mechanical stress that could affect the measurement of twist.
The TNG1091 also adheres to ISO 2061, which is referenced in ASTM D1422. This standard ensures that the instrument meets international benchmarks for precision and accuracy. The alignment with ISO 2061 reinforces the instrument's suitability for ASTM D1422 testing, as both standards emphasize the importance of controlled and repeatable procedures.
Ensuring Compliance Through Instrument Specifications
To support testing to ASTM D1422, the Twist Tester (TNG1091) must provide consistent and accurate measurements of fiber twist. The specifications of 220/110 V at 50/60 Hz and a length of 880 mm are fundamental to achieving this. These values support the testing method by ensuring that the instrument operates reliably and that test samples are handled in a manner that minimizes variability in results.
By selecting the TNG1091, laboratories can confidently perform ASTM D1422 tests with an instrument that has been designed to meet the exacting requirements of the standard. The combination of electrical compatibility and mechanical design ensures that the Twist Tester (TNG1091) is a reliable choice for fiber twist testing.
Instrument models referenced
- TNG1091 Twist Tester (Fineness / Thickness / Length / Density Testing). Published specifications include 220/110 V 50/60 Hz; Length: 880 mm.
Editorial note. This application note summarises the published scope of the standard and our documented model data. Configuration requirements vary between standard editions, and instruments support a method only with the appropriate fixtures and accessories. Please confirm the required configuration against the applicable edition of the standard before ordering; conformity of a given test result also depends on the specimen and the procedure followed.
Instruments referenced
Test standards referenced
Need the instrument for this method?
Send the standard number and the material. We reply with the matching model, its full specification table and a quotation.